Key points of maintenance of hydraulic CNC punch press
- Author:
- Origin:
- Time of issue:2014-07-09 00:00
Key points of maintenance of hydraulic CNC punch press
- Origin:
- Time of issue:2014-07-09 00:00
For different ways of hydraulic CNC turret punch in the maintenance will have different focus, not all are the same, this should be the most basic way of identification, like washing clothes, like some material clothes can not be casually washed by hand, the same truth.
On the topic of the form of CNC tower punch, in its maintenance work also have a lot of attention.
First, pollution. The pollution here is roughly a way of saying that the liquid components used in its internal, keeping clean is the key to ensure its normal work, but also a more important core of CNC tower punch. At least four-fifths of the failures were caused by contamination.
Secondly, oil temperature. This is also a big focus, effective control of oil temperature in this area is a way to improve efficiency.
Then, leakage. This is a taboo thing in many places, and the most annoying thing to see is the leakage of the liquid inside, which will be a threat to its density, so it is necessary to strengthen the daily maintenance.
Finally, noise. Numerical control tower punch a certain degree of noise is also a bad performance, at least will lead to some parts loose state.
CONTACT INFORMATION
Yunnan multifunctional fillet machine - Yunnan bus bar processing machine - Kunming copper bar processing machine
Service hotline: 0871-68310369 13608805685 18587197072
e-mail address: crazer70@qq.com
Company address: No. 1028, Haiyuan Middle Road, national high tech Industrial Development Zone, Kunming
ONLINE MESSAGE
Copyright: Kunming KUNKAI special numerical control equipment Co., Ltd. Yunnan ICP preparation No. 11004860-1 website construction: China Enterprise Power Kunming SEO