Data tower punch the most common failure
- Author:
- Origin:
- Time of issue:2014-07-09 00:00
Data tower punch the most common failure
- Origin:
- Time of issue:2014-07-09 00:00
Any CNC tower punch will have a small temper, that in the face of sudden failure, we should change how experienced processing, will not panic when the time comes?
Now small in accordance with the situation of often obstacles to the machine type of clear to friends, to be able to deal with the future can be better, so as not to catch blind.
Host, this is often the obstacle range is relatively high, from the overall view of the failure of the type is more, want to say one by one.
1, sometimes in the installation of CNC tower punch will inevitably have irregular time, the initial failure is not so easy to show, but after a period of time, the failure will follow, first of all, there are great hidden dangers in the transmission.
2. The track problem, if it is not done well in this respect, there will be some different faults because of friction.
3, there is also in contact, if there is no good processing, the connection will have different degrees of influence.
The reason why this can appear so high range of failure, is roughly in the work of the serious degree is too poor, a lot of situations can be avoided, but it is because of the CNC tower punch in the initial careless bring today's huge obstacles.
CONTACT INFORMATION
Yunnan multifunctional fillet machine - Yunnan bus bar processing machine - Kunming copper bar processing machine
Service hotline: 0871-68310369 13608805685 18587197072
e-mail address: crazer70@qq.com
Company address: No. 1028, Haiyuan Middle Road, national high tech Industrial Development Zone, Kunming
ONLINE MESSAGE
Copyright: Kunming KUNKAI special numerical control equipment Co., Ltd. Yunnan ICP preparation No. 11004860-1 website construction: China Enterprise Power Kunming SEO