Different types of bus opportunities have different functions, different types of its role and scope of application also exist some aspects of the gap. What kind of specific products can be processed what kind of workpiece, some friends on this side is not too to understand, today xiaobian will tell you about the specific role of the bus machine, let you have some understanding of this aspect.

MX series bus bar machine is mainly suitable for high and low voltage switchgear, transformer manufacturing industry, used for processing various specifications of copper, aluminum bus. As long as the user in the corresponding processing unit, can be respectively busbar punching, cutting, folding processing, high production efficiency. Its structural characteristics:

1. The machine is equipped with three processing units of punching, cutting and folding. The busbar can be punched, cutting and folding respectively or at the same time through manual or foot switch. This machine has high production efficiency and easy to use. Equipped with 24V machine tool lamp for partial lighting.

2. The working stroke of each processing unit can be easily adjusted to reduce processing time and improve production efficiency. A variety of machining functions can also be realized by changing the die, such as punching round holes, bending, bending, embossing and flattening.

3. The bending unit is closed structure and adopts horizontal machining mode to ensure the structural strength of the bending unit. By changing the bending die can complete the workpiece bending, vertical bending, embossing and flattening processing.

4. Punching and shearing processing unit adopts vertical processing mode, the machine is equipped with manual button and foot switch two modes of operation, simple operation, flexible and convenient use, general skilled workers can be easy to use operation.

5. The four feet are equipped with walking wheels, convenient to move, and a lifting and leveling device, easy to install. In the substation, the number of low-voltage busbars is large, the operation is frequent, the distance between three-phase wires is close, and it is easy to be harmed by small animals. The manufacturing quality standard of the equipment is low, so its failure rate is much higher than that of high-voltage busbars and main transformer.

The above information is provided by Kunming Kunkai Special CNC equipment Co., LTD., more exciting information please pay attention to!