The production model of bus processing machine must be used for a long time after grinding the edge, after grinding the edge surface must be carried out demagnetization, can not have magnetic force, otherwise easy to block. Spring and other elastic parts in the use of the spring is the most vulnerable to damage, generally revealed disconnect and deformation phenomenon. Bus processing machine to take the method is easy, in the process of easy must pay attention to the specifications and models of the spring, spring specifications and models through the color, diameter and length of three to clearly recognize, only in the three things are the same can be easy.

Busbar processing machine production model in the process of using the punch is easy to reveal the phenomenon of climbing, buckling and gnawing, punching sleeve is generally gnawing. The damage of punch and punch sleeve is usually corrected with parts of the same specification. Punching parameters mainly include office local size, installation local size, length size and so on. Fastening parts, check whether fastening parts slack, damage phenomenon, the method is to find the same specifications of parts to implement the change. Pressing parts such as pressing plate, excellent glue, etc., unloading parts such as stripper board, pneumatic top material, etc.

Bus processing machine protection and recuperation to find the parts of the relationship and there is no missing bad, the damaged part of the repair, pneumatic top material detection for leakage phenomenon, and to take treatment of the specific situation. If the trachea is damaged, change it. According to the office current of the busbar processing machine, select the accurate volume of the fixed current of the busbar slot. The volume of the fixed current shall be selected according to the standard current grade of the busbar slot supplied by the manufacturer.

Busbar processing machine is generally composed of the following units in the busbar system: feeder bus (without interrupting) or plug-in bus (with interrupting) linear segment unit; According to the number of conductors are equipped with three-phase four-wire system and three-phase five-wire system (additional independent PE row, and local manufacturers provide aluminum alloy shell for group grounding PE). Bus processing machine and transformer, power distribution cabinet and other facilities interface into (out) line unit; Reversing unit has L - shaped unit, T - type unit, Z - type unit; Expansion unit has expansion section bus unit; The plug unit has a plug box unit. All units are generally standard preset by the busbar slot manufacturer, or non-standard preset can be adopted after on-site survey according to project requirements to satisfy users and installation requirements. Busbar slot system is commonly used in transformers.