1. Equipment use of busbar processing machine: MX-30SBZC series multi-station turret type busbar processing machine is also called open busbar processing machine. It is mainly suitable for high and low voltage switch cabinets and power transformer manufacturing industries. Copper and aluminum busbars. The user can carry out the busbar punching, cutting and folding processing respectively on the corresponding processing unit, and the production efficiency is high. Second, the bus bar processing machine machine features: The machine is equipped with punching, shearing, folding three processing units, through the foot switch or manual switch. It can be used for punching, shearing and folding of busbars. It is an ideal production equipment for the high and low voltage electrical industry. 1. The punching unit adopts a vertical structure, and the punching unit adopts a vertical turret with six modes, and the whole turntable is barrier-free. Good sight, no need to change molds frequently during use, improve work efficiency 2. The shearing adopts vertical structure, flat blade shearing, the workpiece is flat, no burrs, and no waste. 3. The bending unit adopts open structure and horizontal processing. The flat bending, vertical bending, flattening, embossing and other processing of various sizes can be completed by quickly changing the mold. 4. The three processing units of punching, shearing and folding are controlled by three pump stations respectively, which can realize the simultaneous operation and processing of the three processing units. 5. The bending part of the multi-task turret-type busbar processing machine adopts an open structure and horizontal processing. Flat bending, vertical bending, flattening, embossing, etc. can be completed by quickly changing the mold. The operation is very convenient.