BYJ16D multi-station hydraulic cable stripping machine
BYJ16D multi-station hydraulic cable stripping machine
content
1 Machine shape
2 Main technical parameters of the machine
3 Machine performance
1. Machine outline drawing:
2. the main technical parameters of the machine:
Main technical parameters of stripping machine
Serial number |
Name |
Technical parameter |
Remark |
1 |
System pressure | 16MPa |
|
2 |
System pressure | 160 kN |
|
3 |
Vane pump |
21Mpa 8ml/r Power N=3KW, |
|
4 |
Stripped cable cross-sectional area (mm) |
6, 10, 16, 25, 35, 50, 70, 95, 120, 150 |
|
5 |
Cross-sectional area of crimp head (mm) |
6, 10, 16, 25, 35, 50, 70, 95, 120, 150 |
|
6 |
Machine weight |
450kg |
|
7 |
Machine size |
1050×715×1405 |
|
3. Machine performance:
BYJ16D multi-station hydraulic cable stripping machine is a special equipment for rubber-plastic cable insulation stripping and cable end joint crimping. When wiring and installing switch cabinets and other electrical equipment in electrical equipment manufacturers, it is necessary to strip a large number of power line insulation layers and crimp a large number of cable copper joints (hereinafter referred to as joints). The traditional processing technology is to manually use a tool to cut the cable insulation layer. The labor intensity of workers is high and the work efficiency is extremely low. Because there is no positioning device, the wire is often damaged when the cable insulation layer is cut, causing the wire to conduct electricity. rate drops, the wire heats up. The crimping of the cable connector and the wire is done manually with a hammer. The uneven impact force often cannot compress the connector and the wire, which will also cause the conductivity of the wire to drop and the wire to heat up.
The crimping mechanism of BYJ16D multi-station hydraulic cable stripping and pressing machine is designed according to the requirements of the national standard, which can tightly crimp the cable joints and wires, reducing the heat generated when the cable joints are energized and working, and the stripping and cutting mechanism has an accurate positioning device , which can minimize the damage to the wire when cutting the insulating layer, so as to ensure the assembly accuracy of the electrical equipment produced, and the greater working capacity, which can minimize the labor intensity of workers, improve work efficiency, and make the production of the enterprise run smoothly. Guaranteed.
CONTACT INFORMATION
Yunnan multifunctional fillet machine - Yunnan bus bar processing machine - Kunming copper bar processing machine
Service hotline: 0871-68310369 13608805685 18587197072
e-mail address: crazer70@qq.com
Company address: No. 1028, Haiyuan Middle Road, national high tech Industrial Development Zone, Kunming
ONLINE MESSAGE
Copyright: Kunming KUNKAI special numerical control equipment Co., Ltd. Yunnan ICP preparation No. 11004860-1 website construction: China Enterprise Power Kunming SEO