News Center

Busbar processing machine need to pay attention to the problem before starting

  • Author:Kunkai special CNC Equipment Co., LTD
  • Origin:
  • Time of issue:2012-08-20 00:00

Busbar processing machine need to pay attention to the problem before starting

  • Origin:
  • Time of issue:2012-08-20 00:00

1) must be selected after strict training, and skilled in how to use, how to maintain and other technical operators to work on the machine.
2) Matters needing attention in work clothes: operators should not wear loose clothes and decorative articles. Cuffs and waistlines should be tightened to avoid the danger of being pulled and involved by the machine. Use protective equipment such as safety helmet, goggles, safety boots, and gloves as required.
3) Pay attention to the setting of the operating range: please set the operating range on the basis of fully considering the movement of the machine and bus bar, and irrelevant personnel should not enter the range during operation. In particular, the need for transposition operation, the longer size of the bus row will extend out of the work table, in this case, if the irrelevant personnel did not notice, the body may hit the extended bus row, there is an accident. In order to avoid problems, it is recommended to use safety fence, supporting bracket and other protective devices.
4)Copper bar processing machineBe sure to carry out inspections before starting work.

More information:




Yunnan multifunctional fillet machine - Yunnan bus bar processing machine - Kunming copper bar processing machine


Service hotline: 0871-68310369  18587197072  19969242964


e-mail address:


Company address: No. 1028, Haiyuan Middle Road, national high tech Industrial Development Zone, Kunming


Username used for comment:

Copyright: Kunming KUNKAI special numerical control equipment Co., Ltd. Yunnan ICP preparation No. 11004860-1 website construction: China Enterprise Power Kunming SEO